User ManUal
10Inserting or Removing the Console Inserting the console • Slide the console into the console mount on the handlebar• Makesurethattheconsole
11Inserting or Removing the BatteryInserting the down tube battery 1 Place the battery into the docking station 2 Slide the battery down the rail gent
12Inserting the rear rack battery:1Openthelockcylinder:pleaseensurethatthekeyisremovedfromthelockcylinder2 Place the battery onto the b
13Make sure that the battery is no longer connected to the power supply or charger once the charging operation is complete. The Lithium Manganese batt
14Power supplySL system charging procedure (power supply)• Connect power supply and battery by inserting the charge connector into the touch port –
15PL-250HT (EU) / PL-350HT (NA) systems charging procedure, 2012 - present (single light charger)• Connect the charger and battery by inserting the c
16Assist Mode / Generate ModeThe BionX propulsion system operates in four assist levels in the assistance mode, and in four charging levels in the gen
17Operating the BionX Propulsion SystemTurn the system onBriefly push either top button on the console. The battery will beep 4times and you will see
18Turn on backlight and bicycle light (if applicable)Push and hold key for 4 seconds - display backlight andbicyclelight(ifavailable,batteryin
19Operating the G2 throttleThrottle engagement:Default min. 3 kph to engage throttleNote: throttle control is variable, and the force gauge on the con
2
20Programming the Basic SettingsIn general, all basics settings for your BionX electric propulsion system are pre-set. Basic display functions can be
21Removing and Installing the Rear WheelWe recommend the removal and installation of the rear wheel to be done by a qualified dealer. Should you have
22Installing the rear wheel1Guidetherearwheelaxleintothedropoutsandmakesurethatthebrakedisc(onmodelswithdiscbrakes) is inserted b
23Cleaning CAUTION Never use a high pressure washer or a garden hose to clean the propulsion system. The force of a water jet could damage the electri
24Troubleshooting The system does not turn onCheck the battery and make sure that it is charged. The battery must be correctly inserted in the docking
25Warranty Information and Guarantee1. TheBionXwarrantycoversatwo-yearperiodforBionXpropulsionsystem(s)withintheframeworkofthe followi
2611. No warranty claims are accepted - without limitation to other reasons - in the case of damages due to the following: a) External influences, pa
27BionX, BionX Design and powered by BionX are trademarks of BionX International Corporation.©2011 BionX International Corporation. All Rights Reserv
Your dealerbionxinternational.com
3WelcomeThank you for choosing BionX™. It is our goal to provide you with the highest quality elec-tric propulsion systems available, and offer you t
4User PrecautionsWe want you to have a fun ride, but also a safe one. Carefully read the following information, even if you are an experienced rider.
5Table of ContentsUser Precautions 4Description of the BionX SL Propulsion System 6Description of the BionX PL Propulsion System 8Inserting or Remo
642a13Description of the BionX SL Propulsion System1 G2 Console• Removable G2 console• Illuminated LCD display with battery state of charge•4assis
73 SL Motor• DCrear,hightorque(HT)hubmotor• Nom.250W(EU),350W(NA)• Nom.9Nm/max.40Nm(6.6/30lb-ft)• 1.2Kg(2.6lb)lighterthanthe2
8Description of the BionX PL Propulsion System1 G2 Console (systems 2011 to present)• Removable G2 console• Illuminated LCD display with battery sta
912342b 37V Rear Rack Battery• LithiumManganese(LiMn)• Removable, lockable• Fully charged in: 4-5h• RRL-37V/9.6Ah/355Wh• RRM-37V/6
Commentaires sur ces manuels